Shoei GT-Air II Helmet - Matte Black
0119-0135-08
- Call for Price - We Offer The Best Prices - Cell: 805-907-8811
- Low stock - 4 items left
- Out of Stock
- Authorized Shoei Dealer
- Free UPS 2 Day Shipping on Shoei Helmets ⚡ (Lower 48)
- No Sales Tax, except California
- 90 Day Free Returns & Exchanges
Why is proper helmet fitment important?
- Helps improve helmet safety
- Maximizes comfort
- Reduces noise levels and distractions
- Helps keep the helmet on the rider’s head during an accident
- Helps maximize the safety benefits of the helmet
- ***Safety standards (like DOT or SNELL) are valid only for properly fitting helmets
Finding the right size to start with:
- Pass a soft, flexible tape measure horizontally around the head, approximately 1-inch above the eyebrows
- Move the tape measure up and down slightly to find the largest measurement
- Cross reference with the appropriate size chart and select the helmet size that is closest to the measurement
- If the head measurement falls between 2 sizes, then try on the smaller of the 2 helmets first (use the size chart as a starting point)
When the helmet is on, complete these steps:
- Check that the helmet inner lining fits snugly all around the rider’s head
- Check that the top pad presses on the top of the rider’s head
- Check that the cheek pads press against the rider’s cheeks. When opening and closing the mouth, the rider’s teeth should drag along the inside of the cheeks.
Confirm these aspects of fitment:
- Make sure you CANNOT easily slide two fingers into the helmet along the side of the rider’s temple
- With the chinstrap properly fastened, grab the helmet with one hand on each side. Without moving the head, try to move the helmet up/down and side-to-side.
- The rider should feel the skin of the head and face being pulled as the helmet is moved, and it should not be easy to move.
- If the helmet can be moved around easily and does not “grab” the rider’s cheeks, it is TOO BIG!
Signs a helmet is TOO BIG:
- Helmet may “fall” onto the head with little resistance
- Noticeably loose around the crown of the head
- Eyes are located near the top of the helmet’s viewpoint
- Helmet can move independently of the rider’s head, no pulling on the skin when helmet is moved up/down and side-to-side
Signs a helmet is TOO SMALL:
- Helmet will be extremely difficult to put on
- Likely to cause immediate pressure points
- Eyes are likely located lower within the helmet’s viewpoint
Signs a helmet fits PROPERLY:
- Helmet may take some effort to slide over head
- Helmet should fit snugly around the crown of the head, without overwhelming pressure
- Eyes are located in the center of the helmet’s viewpoint
Rotation Tests that must be performed:
STEP 1
- Securely fasten the chin strap
- Place your hands on the back of the helmet
- Try to push the helmet off by rotating it forward
STEP 2
- Place your hands on the front of the helmet
- Try pushing it off by rotating it rear-ward
RESULTS: With the correct size helmet, there should be LITTLE MOVEMENT, and the helmet should stay SECURELY IN PLACE.
The best ventilation and aerodynamics take this helmet to increased levels of comfort. One of the best all around Shoei motorcycle helmets you can buy. Also can be integrated with the SRL 2 Comm system to stay connected on the go with an easy installation process.
With the innovative and highly-acclaimed GT-Air as a baseline, the all-new GT-Air II was destined for greatness from the very start. Advancements in design, functionality and performance have further evolved SHOEI’s premiere full-face touring helmet, yielding even easier adaptation to the ever-changing conditions throughout your journeys. Featuring a lengthened internal sun shield for optimal sun-glare protection, all-new "first position" shield opening for advanced ventilation and defogging, enhanced aerodynamics and noise-reduction technology, and the ability to seamlessly integrate with the all-new SENA SRL2 Communication System, the GT-Air II is equipped to accommodate your every need.
We are an Authorized Shoei Dealer through Helmet House. All Shoei helmets sold in the U.S. come from Helmet House whether you buy from us or the biggest companies in the market. You can see us as an authorized dealer at this link below...
https://shoei-helmets.com/store/motor-psycho-sport/
WHAT'S IN THE BOX
Breath Guard
Chin Curtain
Pinlock Evo
Helmet Bag
INTERCOM-READY DESIGN
- Designed for seamless integration with the SENA SRL2 Communication System
- SRL2 is specially developed for the GT-Air II, and is sold exclusively by SENA
- For more information on the SENA SRL2 Communication System, please contact your local dealer or visit sena.com
VENTILATION PERFORMANCE
Wind-tunnel optimized to maximize airflow and reduce unwanted noise, the GT-Air II’s three (3) intake and five (5) exhaust vents have been strategically shaped and positioned for improved cool air intake and hot air expulsion. A redesigned upper air intake shutter and enlarged lower air intake opening yield greater airflow throughout the entire helmet.
AERODYNAMICS & NOISE REDUCTION
More than just aggressive styling and aesthetics, the GT-Air II’s progressive shell shape is compact and uniquely streamlined to reduce air resistance and drag. Improved, airtight window beading and an enhanced internal sun shield system prevent unwanted wind noise inside the helmet.
Shield System
The GT-Air II’s advanced shield system provides a large, distortion-free view, facilitates smooth and easy shield changes, features an all-new “first position” shield opening, and comes equipped with a lengthened internal sun shield for optimal relief from sun glare in one quick motion.
Safety
Few characteristics of a motorcycle helmet are as critically important as its first and second layers of defense, which is precisely why the GT-Air II features the SHOEI-exclusive Multi-Ply Matrix AIM shell and Multi-Piece/Multi-Density EPS liner.
COMFORT
The GT-Air II is equipped with a fully removable, washable, adjustable, and replaceable 3D Max-Dry Interior System capable of dissipating sweat 2x faster than traditional nylon interiors. Multi-layer cheek pads for comfort and helmet stabilization along with premium two-tone interior fabric and red stitching accentuate the GT-Air II’s unmatched fit and finish.